Programming the
STORNO CQP4000 (2 Channel)

By: Anton, PA3DBJ
version 2.0 - 5 April, 2001

This page uses JavaScript and was tested with Netscape 4.7.

This page was created in my own time for my own use and to help other radio amateurs. The JavaScript on this page is "freeware", intended for personal use only.
Note: I take no responsibilities for the use of the contents of this page.

System & User Information (required for calculations):

Please fill in all selectable fields. Tone telegram fields may be left blank.
Notes on tone telegrams:
"A": Alarm, "R": Repeat. User selectable tones "D"= x1-key, "E"=x10-key.
For repeater use in Europe: try tone system: CCIR and Tx Tone Telegram: 888. This will generate a 1747 Hz tone for 210 ms. For other tones or systems: look at the JavaScript source code.


Model: Tone Module:
Use Tones: Tone System:
Processor: Reference Xtal:
IF Xtal:
CTCSS Rx: CTCSS Tx:
Rx Tone telegram
max. 7 digits: 0-9,
R,A,D,E 		Tx Tone telegram
max. 7 digits: 0-9
R,A,D,E
ACK Tone telegram
max. 5 digits: 0-9,
R,A,D,E
(optional) 		STF Tone telegram
max. 7 digits: 0-9
R,A,D,E
(optional)
Group Tone
position: 2-7, or
Any:0, All Call:1
(if supported) 		Preamble Time:
0 - 2.25 s
Channel Spacing: kHz Rx vs. VFO freq:
CH 1
Rx Frequency 		MHz CH 1
Tx Frequency 		MHz
CH 2
Rx Frequency 		MHz CH 2
Tx Frequency 		MHz



Prom Contents:

MSB\LSB 0123456789ABCDEF
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F


Cut & Paste Prom Table

"-" = Don't care
"-" replaced by "0"
"-" replaced by "f"